distab^® stop bracket

Home
Concrete construction
distab^® stop bracket

distab the stop bracket for all situations

The distab stop-end bracket for wall formwork is flexible and precise. As the rod is only inserted into the U-profile holder after it has been set in concrete, it does not get in the way when marking out. This allows you to mark out and set the stop-end brackets efficiently. The rod can be cut to size as required.

Advantages

The adaptable stop bracket

Time saving

Simplified process of marking and fixing

Maximum flexibility

Cut the rod to size as required

Versatile application

Ideal for waterstops and exposed concrete walls

Assortment

Technical information

Sales unit

Application

Cross section

Downloads

Rod lengths: 15 cm, 18 cm, 20 cm, 25 cm, 30 cm
1.2 m poles for customised cutting
U-profile brackets
U-profiles and rods available individually or as a set

U-profile: steel, length 14 cm
Rod: Concrete grey PVC, also suitable for exposed concrete
Cutting rod: on circular saw or any other saw
Watertightness: The surface of the rod is roughened to reduce water penetration. Water can still penetrate along the bar under certain circumstances. For this reason, an external seal is required in all cases with wall-through bars.

Individual U-profiles: 100 pieces per plastic bucket
Individual rods in various lengths (15 cm, 18 cm, 20 cm, 25 cm, 30 cm):
15 + 18 cm rods 200 pcs. per plastic bucket
From 20 cm 100 pieces per plastic bucket.
Sets consisting of U-profiles and rods
1.2 m rods for customised cutting: 20 m / bundle

Insert the U-profile directly into the fresh concrete.
Mark the position of the wall using the cribbing.
place the rod in the desired length on the U-profile.
If required: Cut the concrete grey PVC rod to the required length using a circular saw.
fix the rod with a hammer into the base of the notch.
for waterstops: Place the U-profile on both sides of the waterstop and use a rod cut to 6 cm on both sides of the strip.